İçeriğe atla

Dilinizi seçin

Türkçe
Accepted, Stale and Rejected Shares: How to Read a Mining Pool Dashboard

Accepted, Stale and Rejected Shares: How to Read a Mining Pool Dashboard

Michal BenoMichal Beno
17 November 2026 · Pool Dashboard
Short answer
A share is a small proof that your Bitcoin miner is really working. Accepted shares count toward your payout, stale shares arrived too late, and rejected shares were invalid. The pool turns accepted shares into an effective hashrate, which wobbles in short windows, so judge health on the 24-hour average.
~40
shares per minute, Antminer S21 (example)
0.4%
noise in a 24h average (example)
2,016
blocks between difficulty retargets

1What is a share?

A Bitcoin miner, also called an ASIC, spends every second guessing numbers. A real block needs a guess that beats a very hard target. That is so rare that a single Bitcoin miner might wait years for one. A mining pool cannot wait that long to know who did the work.

So the pool sets an easier target, the share difficulty. Any guess that beats this easier target is sent to the pool as a share. Shares never pay on their own. They are receipts. The pool counts them and pays each member by their share of the total. Pool basics are in mining pool settings explained.

Miner tipping a cart of gold tokens into a glowing pool, illustrating shares submitted to a Bitcoin mining pool
Shares are small receipts that prove a Bitcoin miner is working.
Glossary
Share A guess that beats the pool's easy target; proof of work done.
Share difficulty How hard each share is. Higher difficulty means fewer, bigger shares.
Accepted share A valid, on-time share. It counts toward payout.
Stale share A valid share that arrived after the pool had moved on to a new block.
Rejected share An invalid share: wrong job, bad data or a duplicate.
Effective hashrate The hashrate the pool calculates from accepted shares.
Reported hashrate What the Bitcoin miner itself says it is doing.

2From shares to hashrate: the formula

Each share at difficulty 1 takes, on average, about 4.29 billion guesses (2 to the power of 32). Multiply by the share difficulty and you know how much work one share stands for. Count shares over a time window and you get hashrate.

Effective hashrate from shares
hashrate (H/s) = accepted shares x share difficulty x 4,294,967,296 / seconds
Divide by 1,000,000,000,000 to get TH/s. Pools do this sum for you; knowing it explains why the number jumps around.
Worked example
Worked example: 10 minutes of shares
Accepted shares in 10 minutes 400
Share difficulty 65,536
Seconds 600
Hashrate 400 x 65,536 x 4,294,967,296 / 600
Result about 187.6 TH/s
That matches an Antminer S21 rated at 188 TH/s. The dashboard is just counting receipts.
Antminer S21 Bitcoin miner In the catalogue
Antminer S21
Hashrate 188 TH/s
Power 3,290 W
Efficiency 17.5 J/TH
See specs and live price →

Flip it around: a 188 TH/s Bitcoin miner at share difficulty 65,536 sends about 40 shares per minute. Pools raise the difficulty for big Bitcoin miners so they do not flood the server with millions of tiny shares.

Most dashboards show three hashrate lines: the live figure (last 10 or 15 minutes), a 1-hour average and a 24-hour average. Some also show the reported hashrate sent by the Bitcoin miner. If the reported line is steady at 188 TH/s but the 24-hour effective line sits at 170 TH/s, shares are being lost somewhere between the Bitcoin miner and the pool. That gap is exactly what the next two sections help you find.

3Why the numbers wobble

Finding a share is luck, like rolling dice. In a short window you might roll a few more or a few less than average. The fewer shares in the window, the bigger the swing. A rough rule: the typical random swing is about 1 divided by the square root of the number of shares.

How much does the hashrate line wobble by window?
Antminer S21 at about 40 shares per minute; longer bar = bigger random swing
10-minute window (400 shares)
5%
1-hour window (2,400 shares)
2%
4-hour window (9,600 shares)
1%
24-hour window (57,600 shares)
0.4%

So a 10-minute chart that dips from 188 to 178 TH/s is usually just noise. The same dip in the 24-hour average is a real signal.

Good to know
Reported hashrate comes from the Bitcoin miner's own chips and is smooth. Effective hashrate comes from shares and is noisy. Over a full day the two should land within a few percent of each other.

4Accepted vs stale vs rejected

Every few seconds the pool sends a new job. When a new block appears on the network, old jobs become useless. Shares still working on an old job arrive late and are marked stale. Rejected shares are different: the pool says the share itself is wrong.

Share type Paid? Common cause Healthy level
Accepted Yes Normal work About 98-99% or more
Stale No Slow or unstable internet, distant pool server Well under 1%
Rejected No Wrong settings, failing hashboard, duplicate shares Well under 1%
Worked example
Worked example: reading a day of shares
Total shares submitted 10,000
Accepted 9,920
Stale 50 (0.5%)
Rejected 30 (0.3%)
Share of work that counts 99.2%
A healthy day. Lost work is 0.8%, mostly from block changes that no setup can fully avoid.
Worked example
Worked example: what a 3% loss costs
Bitcoin miner Antminer S21, 188 TH/s
Estimated revenue per TH per day about 3.5 cents
Daily revenue at full credit 188 x 0.035 = about $6.58
Loss at 3% stale plus rejected about $0.20 per day
Over a year about $72
Small per day, real over a year. Fixing a bad connection pays back fast. The 3.5 cents per TH is an estimate from 30 October 2026 network data.

5When to worry, and what to check

At what level should each number make you act?
Rough guide; longer bar = more room before it is a problem
24h average below rated by
5%
Stale share rate above
2%
Rejected share rate above
2%
1 Compare 24h average to rated hashrate
More than about 5% below for several days points to a weak hashboard, heat or throttling.
2 Look at rejected share rate
Above 2% often means wrong pool settings, a firmware problem or a failing chip.
3 Look at stale share rate
Above 2% usually points to a slow or unstable network link or a far-away pool server.
4 Check the Bitcoin miner is online
A flat line at zero means no power, no network or a crashed controller.

Also read the difficulty news. When the network gets harder every 2,016 blocks, your hashrate stays the same but your BTC per day drops. That is not a fault. This difficulty explainer covers it.

Magnifying glass over a jagged line that turns smooth, showing how pool hashrate charts even out over longer time windows
Short windows wobble; the 24-hour average tells the truth.
MYTH: A dip on the 10-minute chart means the Bitcoin miner is failing.
FACT: Short windows swing about 5% by pure luck. Judge on 24 hours.
MYTH: Stale shares mean the pool is cheating.
FACT: Stale shares are normal when new blocks appear; a small share is expected.
MYTH: Reported hashrate is what gets paid.
FACT: Pools pay on accepted shares, which is the effective hashrate.
The OneMiners view
Most share problems are physical: heat, dust, unstable power or a weak internet link. OneMiners hosting covers that end to end: management services are included in the hosting price, sites report 98%+ average uptime with 95%+ guaranteed, and defects are covered by a 7-year warranty. The mobile app shows miner stats and live chat support typically replies in under 5 minutes. Power runs from 3.6 cents/kWh in Nigeria on the 7-year prepaid tier (rates as listed on 30 October 2026; check the hosting page for current rates).

6Frequently asked questions

What is a good accepted share rate?
Roughly 98-99% or higher. Stale and rejected together should stay well under 2%.
Why is effective hashrate lower than reported?
Stale and rejected shares, plus luck in short windows. Over 24 hours the gap should be a few percent at most.
Do higher share difficulty settings change my pay?
No. Fewer but bigger shares represent the same work. They only change how smooth the chart looks.
How often should I check my dashboard?
Once a day on the 24-hour average is plenty. Watching 10-minute charts mostly shows noise.
Own the Bitcoin miner. Let OneMiners power, cool and watch it.
Hosting sites across five continents, power from 3.6 cents/kWh on the 7-year prepaid tier (as listed on 30 October 2026) and a 7-year warranty.
Browse Bitcoin minersSee hosting sites

This article is for education only and is not financial advice. Mining revenue depends on the Bitcoin price, network difficulty, fees, power costs and uptime, all of which change. Figures are estimates based on public network data and rates listed on oneminers.com on 30 October 2026; check the live pages for current rates and prices.

Sepet 0

Sepetiniz şu anda boş.

Alışverişe Başla